Asetek Sim Racing Dashboard

Introduction

Discover precision with our state-of-the-art Asetek Sim Racing Dashboard, tailored for seamless integration into your racing setup. Compatible with PC via a single USB connection, this plug-and-play dashboard requires no additional software. Constructed with a durable 6mm real carbon fiber matte twill weave plate, it easily mounts to Asetek wheelbases using supplied M6 bolts and aluminum spacers.

Key Features

Premium Construction

• Material: 6mm Real Carbon Fiber Matte Twill Weave Plate
• Mounting: Mounts to Asetek wheelbases with supplied M6 bolts and aluminum spacers
• Compatibility: Compatible with all Invicta, Forte, La Prima (Not compatible with Asetek's front mount)

Comprehensive Controls

• Left Side:

  • 1 On/Off Latching Toggle with Guard
  • 1 Apex Branded Engine Start Button
  • 3 MOM OFF MOM Toggles with black boot
  • 5 12mm Momentary Push Buttons
    • Multi switch option adds a 7-way multi switch to replace the center push button (Up, Down, Left, Right, Push, Encoder Left & Right)

• Right Side:

  • 8 12mm Momentary Push Buttons
  • 4 CTS Encoders
  • 1 Billet Aluminum Brake Bias Knob (can be used for other settings)

Plug and Play Compatibility

• Ease of Use: Designed for hassle-free setup, the dashboard is PC plug and play compatible.
• Setup: Includes a 6ft USB cable to connect to PC and a 2ft Cat6 cable to connect the left and right sides together.

Important Installation Notes

• Compatibility Confirmation: Please confirm that this will fit your setup. The dashboard has enclosures and cables that come out of the rear which may not fit certain mounts or may need spacers to fit properly. If unsure, please contact us.

• EMI Concerns: Some customers have reported EMI from Fanatec wheelbases. If you are experiencing button press issues, you will need to ground the dashboard to the wheelbase with the provided wire.

Grounding Instructions:

1. Step 1: Plug the 2-pin single wire JST cable into the PCB.
2. Step 2: Strip about 1 inch off the wire, route it to the wheelbase, and wrap it around the bolt between the rear of the dash and the front of the wheelbase as pictured below.
3. Step 3: Mount the dashboard as normal with the wire between the carbon plate and the wheelbase.

If you need assistance, please contact support.